|
|
【PRECAUTIONS】
1.Check that
your transmitter and receiver are operating on the same frequency.
2.Check the
polarity and integrity of connections when plugging servo connectors
into your receiver.
3.Always
carry out a range check prior to flight.
4.In order
to safely and properly operate your R/C equipment, please read
thoroughly All manufacturers manuals and instructions.
5.Always
turn the transmitter on first, then the receiver. When you turn the
system off, always turn the receiver off first then transmitter.
|
|
The Dual Conversion of RX is designed for any electric models application,
whatever you are fly at gum or road or any must interference zone, you can
feel reliable and enjoy it. Once
there are more transmitters around the ground, indoor RF is much worse than
that of outdoor. Cordless phone usually have a 750m (2000') range in the
open field, while indoors, when it will have some noise somewhere in the
same room with the base unit. The engineers of Scanner noticed it. So, aside
form using the latest SMT technology to manufacture SRX of 4g only, they
also make it have all the capacities of full-range receiver. Therefore,
SRX can be used by all the R/C aircrafts, including micro indoor
electronic plane and full-size glow plane and helicopter as well.
Most of feature is that SRX receiver can be
automatic select Hi-Bend or Lo-Bend whatever you insert which bend of
crystals.
you can simply to match Futaba system or JR system without switch.
See the SRX
User Guide for more details. If you are interested in R/C technology,
please look over the
technologies that we adopt.
Also, you can also buy our a pare of crystal for
commutation equipment, it's depend on your transmitter system and has
different Li-Bend or Lo-Bend, in that case we would like mention you double
check you radio system and receivers socket of crystals.
HC-50
(STD Size) <Link>
if you want to learn more about Scanner
Universal instruction left, please check here
Manual-2<Link>
|
